Double Glazing Door Locks
Many homeowners choose double glazed doors and windows to increase insulation as well as energy efficiency and noise reduction. However, they can also be an effective deterrent against burglars.
To ensure the security of your double-glazed windows, make sure they have been equipped with anti-jemmy hinges. These special hardware components make it very difficult to get the window sashes off.
Multi-point locking
Multipoint door locks are among the most effective security tools you can install at your workplace or in your home. They are virtually impossible for anyone to pick or break, and are a great option to add to any security system. They can also boost the efficiency of your energy by reducing drafts and improving the seal around the door frame.
Multi-point locking systems consist of a deadbolt and live bolt (latch) paired with hook bolts above and below the latch, as well as flush bolts that secure the sill and head of the door frame. They usually extend across the entire width of the door, if not more. In commercial settings, they are known as "full-width" systems, because they secure the entire door opening.
Multi-point locking is available on the majority of uPVC and some doors made of timber. This type of lock offers a higher level of security than conventional locks. It is usually specified as part of the Secured by Design initiative, which has been endorsed by the police.
When a uPVC multi-point lock door is shut and the outside handle is turned on, it opens the latch bolt. The inside handle is locked by turning the lock's thumbturn inside of the door with the handle raised or with the key. Always use a key to lock your door. Utilizing handles to lock the door can cause damage to the latch or deadbolt.
If your uPVC lock is not working properly, it could mean that it's out of alignment with the frame of the door. You can check this by placing a spirit level on top of the door and observing any gaps in the miter joints at the point where the frame meets the door.
It is worth asking your double glazing specialist whether there's a gap and to fix it. They'll be able to replace the lock on your behalf or install a replacement. They'll be able to tell whether it's due to damage to the frame or the lock unit. In such cases, they'll be able to repair or replace the multipoint lock to get it functioning again.
Espagnolette locks
Espagnolette locks have become a common locking mechanism for double-glazed uPVC windows. They are easily recognised by their flat strip shape which moves as you turn the handle. They are used with multi-point locks that are placed around the frame of your window to lock and unlock it safely. If you are looking to upgrade your uPVC window, espagnolette handles can be used to build new windows or for renovations. They are available in a range of contemporary and period styles and come in a range of bar lengths, backset options and the heights of the mushroom cams, with a variety of a profile that will suit the majority of applications.
While they are a popular choice, espagnolette locks have been criticized for providing inadequate security for French doors. A single locking point located in the middle of the door is easily accessed. In addition, it is relatively easy for thieves to open your French doors by bending the handle to either the left or right. These doors are typically the main entrances to your home, and should be secured to reduce the risk of unwanted intrusion.
The espagnolette lock does not function as an actual bolt, but rather it is a single-piece mechanism that can be attached externally to the edges of French doors or internally to the frame of a casement. The mechanism is operated by a handle. It consists of a rod which has hooks at its head and sill. These hooks fit into sockets in the window frame. When the handle is turned, the rod is moved between up and down, and the hooks are locked into their receivers to lock and unlock your windows.
They are a great option for those looking to improve the security of French doors without compromising on the aesthetics of the door. These types of handles can be paired with a variety of other styles and can be master-keyed for extra peace of mind.
Similar to cockspur handles the espagnolette handle designs are available both cranked and inline versions to fit the shape of your window. Inline versions operate the same way as the original handle, whereas cranked versions are available in both left and right handed options.
Laminated glass
Laminated glass is commonly used for windows since it is extremely difficult to break. It is also more secure than standard safety glass because it is fused together into one piece instead of breaking into sharp fragments. This makes it ideal for both residential and commercial properties.
Lamination is a process which involves the joining of two pieces of flat glass with a plastic layer in between. The entire piece is heated and put under pressure to make it sturdy enough to be used as windows or doors. The laminated glass that is created is five times stronger and 100 times stiffer than glass that has been tempered. It also withstands greater impacts and resists weathering.
This type of glass is perfect for buildings that must perform well, such as enhanced security (impact-resistant glass) UV protection, or noise reduction. Laminated glass can be paired with high-performance coatings that improve both thermal insulation and solar control. It is available in a variety of options that will fit your project and budget.
Laminated glass is more secure to use than tempered glass because it can be cut after the fact. It is less likely to break if it is cut from the side of the glass rather than the edge. window lock repairs near me repairmywindowsanddoors.co.uk makes it a great choice for glass that does not open or close, like cellar windows.
It is also utilized in high-rise structures in urban areas because it can reduce the volume of noise that is transmitted from the street to the interior of the. The Saflex PVB layer that is found in the laminated glasses also helps to block harmful sun ultraviolet radiations. This helps prevent discoloration of furniture, fabrics and other things.
Although laminated glass is more expensive than tempered, it offers many advantages that can reduce your costs over time. It's also more durable and resistant to abrasions and scratches, and can be made according to your specific requirements. It is also less susceptible to heat damage, which makes it an ideal choice for coastal areas or high-rise buildings. Some building codes even require that exterior doors and some interior windows are made from laminated glass.
Friction hinges
Friction hinges help keep doors, flaps and panels. They also can withstand the movement of other hinges and stop hard slamming or unintentional opening and closing. They are available in a variety of shapes and sizes. They also have different torques, which are the forces that determine how long the hinges remain open or closed.
Aluminum is an excellent material for friction hinges due to its durability, corrosion resistance, and high strength-toweight ratio. It is also light and easy to handle. It is also available in a variety of colors, and it's simple to install and fix. Brass is a different material that is widely used for friction hinges. Brass is an alloy made of zinc and copper which is naturally resistant to corrosion. It is also stronger and more durable than steel, however it is more expensive.
The hinges made of friction used in uPVC double glazing door systems can be customized to meet the requirements of the application. These customizations can include the amount damping, the viscosity of lubricant, and the degree of tolerance between components. They may also include the environmental conditions where the hinge will be used. These variables can affect the dynamic torque of hinges. It is important to be aware of the metric when in critical applications.
There are different types of friction hinges, including one-way and detent. One-way friction hinges are characterized by constant torque in one direction, whereas detent friction hinges don't have any torque in the opposite direction. Other variations include discs, pipe and curl friction. Each type of hinge has its own set of characteristics that make it more or less useful in particular applications.
Friction hinges are also referred to as hinges with a free-stop since they permit doors or lids to remain at an angle even after the force has been removed. This helps prevent injuries through accidental closing. This type of hinge is perfect for use in medical, tough or hazardous areas. The hinges are configurable to have different degrees or free play, and can be made to function in a variety of angles.